Common Service Parts - Husqvarna HB32 Manual Del Operador

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

Service Air Filter

WARNING! Fuel and its vapors are extremely

flammable, which could cause burns or fire,

resulting in death or serious injury.

• Do not start and run engine without air filter removed.

Your engine will not run properly and may be damaged if

you run it with a dirty or missing air filter.

1. Pull the latch and open the cover.

Air Filter

2. Carefully remove air filter to prevent debris from falling

into carburetor.

3. Wash foam air filter in liquid detergent and water.

Squeeze dry in a clean cloth.

4. Saturate foam air filter in new engine oil and squeeze

in a clean cloth to remove excess oil.

5. Reinstall clean or new air filter in base.

6. Close the cover and secure the latch.

Service Spark Plug

Changing the spark plug will help your engine to start

easier and run better.

1. Clean area around spark plug.

2. Remove and inspect spark plug.

3. Replace spark plug if electrodes are pitted, burned

or porcelain is cracked. Use the recommended

replacement plug. See Specifications.

4. Check electrode gap with wire feeler gauge and reset

spark plug gap to recommended gap if necessary

(see Specifications).

5. Install spark plug and tighten firmly.

Latch

Cover

Inspect Muffler and Spark Arrester

Inspect the muffler for cracks, corrosion, or other damage.

Remove the spark arrester, if equipped, and inspect for

damage or carbon blockage. Clean if carbon blockage is

found using brush and commercial solvent or replace if

damaged.

WARNING! Contact with muffler area could

cause burns resulting in serious injury. Do not

touch hot parts.