Inserting The 3-Stage Filter Cartridge; Setting Up The Machine - AL-KO PURE Instrucciones De Operación

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

First use of your AL-KO PURE
13.4

Inserting the 3-stage filter cartridge

1
1. Pull out the operating unit from the top.
Fold the operating unit to the side.
2. Remove the transport lock of the filter cartridge.
3. Insert the filter cartridge.
The three spacers of the filter cartridge must lock into the notches of the machine.
The filter cartridge can only be locked into one position.
4. Re-insert the operating element into the machine from the top.
The operating element can only be completely locked into one position.
If the operating element is not locked completely, then the machine will not turn on.
13.5

Setting up the machine

1. Place the machine on a flat, stable surface.
Do not place the machine on hot surfaces or in the vicinity of heat sources.
Do not let liquids or foreign objects enter the machine (e.g. metallic objects).
2. Make sure that the air inlet (bottom) and the air outlet (top) are not blocked.
3. Plug the machine's mains cable into the outlet.
4. Your AL-KO PURE is now ready for operation.
We recommend that you first let the machine run overnight to ensure a basic purification of
your room.
Translation of the original operating instructions
1 Operating unit
2
2 Spacer
3
3 3-stage filter cart-
ridge
37

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido