Dismantling The Tool - OMG AccuTrac Manual Del Propietário

Dismantling the Tool

Dismantling the AccuTrac for routine maintenance:
1. Disconnect the upper link from the feed tube assembly by
sliding the black plastic bushings inward and push the
upper link forward to disengage. Repeat the process for
the opposite upper link. The tool can now be removed from
the base by pulling up on the tool.
1a
1b
OMG ROOFING PRODUCTS
2. Once the tool is separated from the base you can remove
the feed tube from the upper tube by pulling on the
spring-loaded retention pin and separating it from the
bracket on the upper tube. The feed tube should now
release from the tool.
2a
2b
800 . 633 . 3800
WWW.OLYFAST.COM
13