Interlogix TruVision NVR 50 Guia De Inicio Rapido página 4

Figure 2: Front panel controls
Item Name
1. Status LEDs
2. IR receiver
3. Front Panel Lock
4. Display buttons
5. Numeric buttons
6. USB Interfaces
7. Menu and Search
buttons
Playback buttons
EN : 2
Description
Power: Green indicates the NVR is working correctly. Red indicates
a fault.
Alarm: Lit indicates an external alarm status or motion.
Tx/Rx: Tx/Rx indicator blinks green when network connection is
functioning properly.
HDD: HDD indicator blinks red when data is being read from or
written to the HDD.
Ready: Green indicates the device is functioning properly.
Archive: Archive indicator blinks green when record files or pictures
are being exported to a USB or eSATA device.
Receiver for IR remote.
You can lock or unlock the front panel with a key.
Display: Toggles through the various multiviews: full, quad, 1+5, 1+7,
9, and 16.
Sequence: Starts/stops sequencing in live view mode.
A: Selects the main monitor
B: Selects the spot monitor (in live view)
F1: In all-day playback, click to start and stop video clipping.
F2: In live view mode, click to display/hide the time bar.
In all-day playback, click to hide/display the playback control toolbar.
Switch between different cameras in live, PTZ control or playback
modes.
Universal Serial Bus (USB) ports for additional devices such as a
USB mouse and USB Hard Disk Drive (HDD).
Menu: Enter/exit the main menu.
Search: Enter the advanced search menu.
: Jump back to the oldest available video and starts the
playback.
: Pause playback.
: Instantly playback the currently selected file. Default time is
1 minute.
Live: Switch to live view mode.
Replay: Replay the current file in playback Starts at the beginning of
the file.
TVN 50 Quick Start Guide