Using The Environment Switch - Hitachi Sprint SH-P300 Guia Del Usuario

Using the Environment Switch

Your PCS Phone has 3 operating modes which differ in the way calls and
messages are received. You can set the mode, simply by putting the switch
in the up, middle or bottom positions, providing a quick and easy way to
select modes suited to various places and situations.
The mode names for the three switch positions are
Environment
Slide the switch up or down to switch modes. Silent All or names of the
Environment modes appear on the display.
You can select
Environment mode. (See page 46.)
You cannot change the settings for Silent All mode, but you can
change the settings from the defaults in the other modes. (See page
32.)
Mode Name Default Volume
Silent All
Environment
Meeting Silent
Outdoor High+
Office
Private
Normal
Note:
If Office/Private of Environment mode is selected, only phone
numbers assigned to Office/Private groups will ring on your phone.
Section 2: Understanding Your Phone
24 2A: Your PCS Phone – The Basics
(middle), and
Normal
Meeting, Outdoor, Office,
Setting
Silent
Vibrate
Medium
High+
Vibrate
Medium High
(bottom).
or
Private
Default Ringer Type for voice calls
with Caller ID
No sounds
Tone 1 (Mode settings take
precedence)
Home Telephone 1 (Mode settings
take precedence)
Home Telephone 2 (Mode settings
take precedence)
Tone 1 (Internal Phone Book settings
take precedence)
American Patrol (Internal Phone
Book settings take precedence)
(top),
Silent All
within the