NOTE: The default mode of the scale is set so the menu option is locked out. If the menu
button is pushed before activating the menu option, "MenuLock" will show on the display. To
temporarily reactivate the use of the MENU key, press and hold the MENU key for 5 seconds.
During the menu access delay, the menu will display "MenuLock". After 5 seconds, the menu
will show on the display and you may begin navigating through the menu.
01
WEIGHT DISPLAY MODE
(only applies to pound values, NOT the metric values)
Before making changes to this scale setting, please refer to "Menu" instructions above to
temporarily activate the Menu key.
The user can set the screen display value in either fraction of pound (¼, ½ or ¾ lb), in pounds
and ounces (resolution of 4 ounces) or in decimals (resolution of 0.2 lb). When kg is selected as
the units of use, these settings have no effect. The mode that is selected is used through all the
screens.
to chan
e Enter
g
▲▼
Figure 3. Main Menu
7