Frequency; Waste Management; Treatment Of Packagings And Non Dangerous Wastes; Treatment Of A Household Weee - S&P VMC AKOR ST HR Manual De Instrucciones


Remove the cover,
The heat exchanger is fragile, do not handle it by the airflow channels.
Remove dust from the exchanger with a vacuum cleaner. Do not use a brush which may introduce
dust into the exchanger and thus the air passage channels.
When reassembling, reposition the exchanger unit making sure the arrows on the insulation are
absolutely directed at the fan units.

7.2 Frequency

Elements
Extraction and air output nozzles
Filters
Heat exchanger

8. WASTE MANAGEMENT

8.1 Treatment of Packagings and non dangerous wastes

The packagings (unconsigned pallets, cartons, films, wooden boxes) and other non dangerous wastes must
be made reusable by an approved service provider. It is strictly prohibited to burn, bury or dump them in
nature.

8.2 Treatment of a household WEEE

This product must not be dumped or treated with household refuse, but must be deposited in an appropriate
collection point for waste electrical and electronic equipment (WEEE).
S&P SISTEMAS DE VENTILACIÓN S.L.U.
C/ Llevant, 4
08150 Parets del Vallès (Barcelona)
Tel. +34 93 571 93 00 - Fax +34 93 571 93 01
www.solerpalau.com
ENGLISH

Using the two handles, lift the
exchanger block with its insulation
Maintenance frequency
Every 2 months
Every 6 months
Every 6 months
20 / 40

Separate the casings to
remove the heat exchanger
NT_51895501_AKOR ST HR-AN_140325.docx