Troubleshooting - RIDGID SeeSnake DVDPak OLED Manual De Instrucciones

SeeSnake
Chart 1 Troubleshooting
PROBLEM
Camera video image not
seen.
Flashing Battery Warning
appears.
16
® DVDPak
PROBABLE FAULT LOCATION
No power to SeeSnake.
Connections faulty.
Display set to wrong source.
Batteries Low.
DVDPak 18 V batteries low.
Check power is correctly plugged in or battery is
charged.
Check switch on on DVDPak.
Check connection to DVDPak unit from SeeSnake.
Check seating, and pins in SeeSnake connection.
Set-up as described in Video Display Set-up.
Recharge batteries or connect external power sup-
ply.
Recharge DVDPak batteries. Switch to AC power
(110/220VAC).
Ridge Tool Company
SOLUTION