Types Of Connection Of Dust Collection Couplings - TECNOPLUS Sistem-air Domestic TECNO R-evolution Serie Manual Tecnico

TECNO R-evolution Instruction manual
ByTecnoplus
s.r.l.
CENTRAL VACUUM SYSTEMS
Tighten the screws in the wall plugs
and check that the bracket is well
anchored to the wall.

9.7 Types of connection of dust collection couplings

The TECNO R-EVOLUTION vacuum cleaner offers the Customer the possibility to choose the desired
confi guration, depending on the suction cleaning desired:
• confi guration 1 cyclonic bagless vacuum cleaning
• confi guration 2 bag suction
Choosing the cyclonic suction, the Customer has the possibility to have a service suction inlet to be
found directly on one side of the appliance; this service inlet can be used with a fl exible hose to vacuum
clean the area immediately around the appliance.
During installation:
• if the confi guration 2 option is selected, the elbow coupling will be assembled and the Customer will
remove the conveyor cone and insert the ring seal; the closing cover will then be placed in the cyclonic
suction dust inlet.
• if the confi guration 1 option is selected, the suction inlet will be assembled.
.
24
3
Hook the vacuum cleaner to the anchor-
4
ing bracket by lifting it, leaning it against
the wall and allowing it to slide down until
it fi ts into the fi xing plate.
21/01/16 Rev:3.0.0