Set Up Reset Parameters; Set Up Language - TECNOPLUS Sistem-air Domestic TECNO R-evolution Serie Manual Tecnico

11.5.4 Set up reset parameters

In this menu you can reset all changes made on the parameters.
By activating this function all parameters will be brought back to the default values.
RESET PARAMETERS
Reset parameters

11.5.5 Set up language

In this menu you can modify the language chosen during the installation phase.
LANGUAGE SELECTION
English
Italiano
Deutsche
Francais
Espanol
11.5.6 6 Set up unit model
In this menu you can modify the model of central vacuum unit selected during the installation phase.
MODEL
Revolution 150
Revolution 250
Revolution 350
Revolution 450
Dual Power
21/01/16 Rev:3.0.0
Press ENTER to activate the function.
1
This way it is possible to restore all chan-
ges made to the default settings.
Press Esc to confi rm and exit the menu.
Selection is active
Selection is not active
Press the Up and Down arrows to select
1
the language
Press Enter to activate the language
Press Esc to confi rm your choice and go
back to the previous menu
Selection is active
Selection is not active
Press the Up and Down arrows to select
the language
1
Press Enter to activate the chosen lan-
guage
Press Esc to confi rm your choice and go
back to the previous menu
Selection is active
Selection is not active
2
41