Cleaning The Suction Container (Cylinder); Emptying The Dust Bin (Cyclonic Suction) - TECNOPLUS Sistem-air Domestic TECNO R-evolution Serie Manual Tecnico

2
Level 2
• check of the wear of the suction motor carbons
• replacement of the suction motor carbons
• everything indicated in level 1
Also in this case the user can decide whether to stop the suction and perform the maintenance operations
or to go on with the vacuuming activities and fi nish up.

12.3 Cleaning the suction container (cylinder)

Periodically clean the outside casing of the vacuum cleaner with a soft damp cloth with water and neutral
soap.
Important: only use water or neutral soap and water to clean the vacuum cleaner. The use of
other solvents or alcohol can entail damages. Ensure the system surface is completely dry before
switching it back on.
Always use a suitable mask to protect against airborne dust and wear latex gloves to protect your hand
skin.

12.4 Emptying the dust bin (cyclonic suction)

Switch the suction system off by pressing the ON/OFF switch.
Remove the dust bin
1
Remove the conveyor cone
2
Empty the dust bin
3
43
21/01/16 Rev:3.0.0