Dyna-Glo DGA550SSN Manual De Instrucciones página 23

CARE AND MAINTENANCE
Reinstalling the Burner Assembly
1. Ensure that gas valve orifices are correctly positioned
inside burner inlet (venturi).
2. The use of a flashlight may be necessary to ensure the
correct position.
3. It is recommended to view the correct position through
the firebox vent holes.
If the instructions above are not followed, a fire or explosion may result, possibly causing serious
bodily injury or death.
Other Care and Maintenance
• It is recommended that inspection and service on this appliance be conducted annually by a
qualified service person.
• It is recommended that you regularly check that the outdoor cooking appliance area is clear and free
from combustible material, gasoline and other flammable vapors and liquids.
• It is recommended that you regularly check that the flow of combustion and ventilation air is not
obstructed.
• It is recommended that you regularly check that the ventilation openings of the cylinder enclosure
(cabinet) are free and clear from debris.
• It is recommended that you regularly check and clean the burner/venturi tubes for insects and insect
nests. A clogged tube can lead to a fire beneath the grill.
The electronic ignition requires one "AA" alkaline battery, which is included.
DO NOT mix old and new batteries.
DO NOT mix alkaline, standard (Carbon-Zinc), or rechargeable (Nickle-Cadmium) batteries.
DO NOT dispose of batteries in fire. Improper disposal may cause batteries to leak or explode.
WARNING
WARNING
BURN HAZARD
23