Application Examples; Submersible Pump; Compressor Oil Pump - Emerson Digistart CS PT100 Guia Del Usuario

7.

Application Examples

7.1

Submersible pump

The module can be connected to high and low pressure switches, a PT100 to monitor pump temperature, and a level relay to protect
against low water. This provides a simple, integrated pump monitoring system without any extra components such as timers, relays and
temperature monitoring devices.
Figure 7-1 Submersible pump application
Low/High pressure switches
Water flow
7.2

Compressor oil pump

The module can be used on a compressor oil pump system, to monitor conditions such as oil line pressure and oil temperature.
Interlocking the trip output with the compressor motor means that the compressor is safely shut down when a fault occurs, preventing
damage to the system.
Figure 7-2 Compressor oil pump application
MOTOR
8
<P >P
Check
valve
MOTOR
PT100
PUMP
Water
level
probe
COMPRESSOR
Low/High pressure switches
Oil
<P
lines
>P
OIL PUMP
PT100
www.controltechniques.com
Motor supply
Low/high pressure input
Temperature (PT100) input
Low water input
Level Relay
MOTOR
Low Oil pressure input
High Oil pressure input
Module
Temperature (PT100) input
Motor supply
Mains supply
Soft
Module
starter
Trip output interlock
Soft
starter
Mains supply
Pump Application Module User Guide
Issue 1