Rexel V60 Instucciones De Funcionamiento página 7

1540 V60-V65 Shredder Manual EU_1540 V60-V65 Shredder Manual EU 07/02/2012 12:50 Page 7
Operation
Operation V60 - Ribbon Cut Model
1. Push the switch to the on position (I).
2. Feed paper into the entry to activate the auto start trigger. Enter maximum sheets for most compaction.
3. Cutters will stop automatically after the paper has passed through the head.
4. The waste bin requires emptying when the machine stops automatically during the shredding
process and/or when it is not possible to feed a single sheet. (figures 2 & 3)
5. Press the button to release the compactor plate and dispose of paper, as shown in figures 4 & 5.
6. When not is use, move the switch to the off position (O).
Operation V65 - Cross Cut Model
The cross cut model uses a sharpening cutting mechanism, which makes the exit of the unit dangerous when
in use. Always ensure the unit is correctly seated on the waste bin provided before operation. Disconnect from
the power supply when removing paper manually from the exit. Take extra care when this unit is in use near
young children (for example in the home office) - ensure they are not left unattended when this machine is
connected to the power supply.
1. Push the switch to the on position (I).
2. Feed paper into the entry to activate the auto start trigger.
3. Cutters will stop automatically after the paper has passed through the head.
4. Empty the waste bin regularly to ensure the shredder exit does not become blocked with paper.
5. When not is use, move the switch to the off position (O).
Clearing Paper Overloads
1. If the machine stops due to excessive paper volume, move the switch to the reverse position (R) and hold
until the paper has cleared from the exit.
2. Separate the sheets and re-feed a smaller quantity.
3. If the sheet jams when reversing, tear off the accessible sheets and move the switch to the forward
position. If this fails, to clear, repeat the process again.
4. In the case of serious paper jam, please take the unit to your authorised service provider.
5. Warning - do not under any circumstances use any metal objects (scissors, letter openers, etc.) in an
attempt to clear the entry - this model has mains voltage inside the casing, which could cause
serious injury.
G