General Description; Extent Of The Delivery; Overview; Functional Description - Parkside RAPIDFIRE Traducción Del Manual De Instrucciones Original

GB IE

General description

Extent of the delivery

Carefully unpack the appliance and check
that it is complete:
- Interchangeable cordless screwdriver
- Battery-charger
- 14 Bits, 25 mm
- Extension bit holder
- Utility belt
- Translation of the original
instructions for use
The illustrations are on the
fold-out pages.

Overview

1 Transport safety
2 Fixing screw
3 Bit
4 Bit holder
5 Slide of the interchangeable
cordless screwdriver
6 Battery Indicator
(not visible)
7 Charging socket (not visible)
8 LED working light
9 Direction of rotation switch
10 On/off switch
11 5 Exchange bits with holder
12 Battery-charger
13 Extension bit holder
14 Utility belt
15 Change drum

Functional description

The interchangeable cordless screwdriver
clockwise/anti-clockwise rotation has a bit
changeable drum (can be fitted 9 times
44
with 25 mm bits), a 6-point bit holder and
an LED work light. Maximum torque of 4
Nm.

Technical data

Appliance
Motor voltage..........................3,6 V
Idling speed (n
0
Weight
(without battery charger) ........ 0,486 kg
Sound power level
(L ) ................... 62,2 dB(A), K= 3 dB
pA
Sound power level
Guaranteed ........................76 dB(A)
Measured ............ 73,2 dB(A); K= 3 dB
Vibration (a ) ......................................
h
Screwdriving without impact
.................... 0,198 m/s
Battery (Li-Ion)
Nominal voltage ......................3,6 V
Capacity .................................. 1,5 Ah
Charging time .......................... ca. 3 h
Recharger ............JLH030600600G
Nominal consumption ....................8 W
Uptake voltage/Input
....................... 100-240 V~, 50-60 Hz
Voltage output/Output
....................................6 V
Output power ....................max. 4,2 W
Protection class .............................
Protection category ...................... IPX0
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
Technical and optical changes may be
undertaken in the course of further devel-
opment without notice. All dimensions,
references and information in this instruc-
tion manual are therefore not guaranteed.
) ....................200 min
(L )
WA
, K= 1,5 m/s
2
600 mA
-1
2
II