Performing A Control Solution Test - Fora D10 Manual Del Usario

Performing a Control Solution Test

26
Step1
Take a test strip out with clean, dry
hands first.
Step2
Insert the Test Strip to Turn On the Me-
ter. Insert the test strip into the meter and
wait for the meter to display "
blood symbol "
Step3
Press the M button. After blood drop
symbol flashes, press the M button. "CTL"
will appear on the display. With the "CTL"
sign on the display, the monitor will NOT
store your test result in memory.
Step4
Obtain control solution. Shake the con-
trol solution vial well. Remove the cap.
Squeeze the vial, discard the first drop,
and wipe off the dispenser tip to prevent
contamination. Squeeze the vial again to
".
" and a