Briteq POWERPIXEL4-RGB Manual De Instrucciones página 9

ENGLISH
 Make sure that all units are connected to the mains.
 Each light effect in the chain needs to have its proper starting address so it knows which commands
from the controller it has to decode.
RDM FUNCTIONS / REMOTE SETUP
RDM means "Remote Device Management". This projector works with a brief set of RDM-functions which
means that it can setup a bi-directional communication with an RDM-compatible DMX-controller. Some of
these functions are briefly explained below, others will be added in the future.
 The DMX-controller sends out a "discovery command", all RDM devices respond and send their unique
device ID.
 The DMX-controller asks each RDM device for some basic data so it knows which devices are connected.
The POWERPIXEL projector will respond:
 Device name: PIXEL4-RGB or PIXEL8-RGB
 Manufacturer: Briteq®
 Category: LED Dimmer
 Firmware: x.x.x.x
 DMX address: xxx
 DMX footprint: xx
 Personality: xx
 The DMX-controller can send certain commands to each RDM device which allow remote setup of the
units. Thanks to this the POWERPIXEL can be setup remotely.
The following functions can be managed remotely:
No more need to take a ladder and set all units one by one!
 DMX START ADDRESS: The start address can be set remotely from 001 to xxx.
 PERSONALITY: The DMX working mode (DMX-chart) can be set remotely.
These 2 functions make it possible to prepare a complete DMX-patch of all projectors on the DMX-
controller and send these data to all projectors at once. More functions will be added later.
DMX CHARTS
For maximum compatibility both POWERPIXEL4-RGB and POWERPIXEL8-RGB have the same DMX-
charts so they can easily work together. More advance DMX-charts are specific for each model. Below you
will 3 parts: Combined charts, specific charts for POWERPIXEL4-RGB and specific charts for
POWERPIXEL8-RGB.
A/ DMX CHARTS FOR BOTH POWERPIXEL4-RGB + POWERPIXEL8-RGB
3 channel DMX-Mode: all pixels working together in RGB
Channel: Value:
1 000-255
2 000-255
3 000-255
4 channel DMX-Mode: all pixels working together in RGB + MASTER DIM/SOUND/STROBE
Channel: Value:
1 000-255
2 000-255
3 000-255
000-190
191-200
4
201-247
248-255
5 channel DMX-Mode: all pixels working together in RGB + MASTER DIM + SOUND/STROBE
Channel: Value:
1 000-255
2 000-255
3 000-255
BRITEQ
®
(firmware version of the projector)
(current DMX start address of the projector)
(number of DMX-channels used by the projector)
(current personality [or DMX-working mode] used by the projectors)
Function:
Red (0-100%)
Green (0-100%)
Blue (0-100%)
Function:
Red (0-100%)
Green (0-100%)
Blue (0-100%)
Master dimmer
Sound control (7 colors)
Strobe
Master dimmer @ 100%
Function:
Red (0-100%)
Green (0-100%)
Blue (0-100%)
7/64
OPERATION MANUAL
Remarks
Remarks
000=0% ~ 190=100% (full open)
Audio sensitivity: 191=low ~ 200=high
Increasing speed: 201=slow ~ 247=fast
Master dimmer is full open
Remarks
POWERPIXEL4+8-RGB