Use Of Product - Jimmy B32 Manual De Instrucciones

Use of Product

Control Panel Instruction
Speed control knob
Speed Control Knob
After the power is connected, the user can use the "speed control knob" to adjust the speed by
themselves according to different food materials, so as to process the food materials to the best
effect.
Level "0": It's used to turn off the machine.
Level "1": Low rotation speed, used for stirring some soft fruits, such as tomatoes, watermelon,
oranges, also used for crushing the boiled grains and beans.
Level "2": High rotation speed, used for crushing some hard fruits (such as carrots), grinding
nuts, dried grains, dried beans, and crushing hard crystals (such as rock candies, ice cubes).
"Pulse": Used for pulse blending or cleaning the blending jar.
Operation Steps
Only when all parts of this product are installed
correctly can they be used normally.
1. Place the blender on a stable table. To
ensure safety, please check whether the speed
control knob stays "0" before the power cord is
plugged in. (Figure 1)
2.Put fruits, vegetables or other food material
into the blending jar. The solid food material
should be cut into 1~ 2cm cubes, and be added
appropriate amount of liquid (not less than
200mL). Cover the blending jar with the outer lid
and the inner cap. (Figure 2, 3 & 4)
Notes: Liquid shall not exceed the upper limit of the
maximum water level by 900mL.
3.Aim the blending jar's bayonet at the main
machine's bayonet, and place it vertically on the
main machine, rotate it clockwise and finish the
installation when a "click" sound is heard. (Figure 5)
Display panel
1
3
Outer lid
Inner cap
5
Rotate
clockwise
2
Upper limit of
the maximum
water level
4
Cover
the inner
cap and
outer lid
6
3