Cleaning - Tena SmartCare Instrucciones De Uso

EN

CLEANING

Change Indicator
The transmitter and sensor strip should never be cleaned
separately – only clean the Change Indicator when it is fully
assembled. Clean the Change Indicator using a cloth or a
disinfectant when required.
We recommend using:
side of the sensor strip.
The assembled Change Indicator can be rinsed under a tap.
the Change Indicator and the incontinence product. Fibers can
be removed using the free end of the sensor strip.
Gateway
Clean the gateway with a dry cloth when needed.
WARNING
Clean the Change Indicator when fully assembled to prevent
water from entering the device.
Do not clean in the washing machine.
Do not submerge in water.
22
TENA SmartCare Change Indicator TM/MC