Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
"HOT WATER/HEATING" MODE (
This mode provides both hot water and heating, operated automatically according to requirements.
"HEATING" FUNCTION (
This mode enables the boiler for activation of the heating circuit in "Automatic" or "Manual".
When this mode is selected you can adjust heating water temperature and set the on/off times to be used
in automatic mode.
In this mode, any request for the production of hot water will be ignored.
"AUTOMATIC" TEMPERATURE CONTROL MODE
The control unit has a daily/weekly timer that automatically adjusts room temperature to "comfort" or "low
temperature" values over a 24 hour period, with independent settings for each of the seven days.
To enable automatic operation press the
Hourly programming of temperature values is only permitted with the Heating or Hot water/Heating functions
enabled.
HOURLY PROGRAMMING OF TEMPERATURE VALUES
Press key V to select the desired day on the
The display will then show the programme graph for the selected day by displaying the "indicator lights"
next to the "comfort" level.
To modify these settings press P within 5 seconds.
The time "00:00" will now appear on the display and the indicator light corresponding to that time will
begin to flash.
Press the + and – keys to increase or decrease the time in 30-minute steps.
The
and
level and
low temperature level)
Select the desired value by acting on the
ture level) keys. The indicator light will take on the desired value and programming will advance by one
step: the next indicator light to be programmed will then flash.
Once programming is over press P to memorise settings or V to cancel the modifications.
The timer can memorise up to 48 daily temperature value changes.
AND
SYMBOL DISPLAYED)
key and the
symbols show the present value of the indicator light (
SYMBOLS DISPLAYED)
symbol will be displayed.
indicators.
(comfort temperature level) and
52
comfort temperature
(low tempera-
Publicidad
Capítulos
Tabla de contenido
