Descargar Imprimir esta página

Battery Charge Level - Topcom PMR BABYTALKER 1010 Manual De Usuario

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 59
TOPCOM Babytalker 1010
10 Supporting device for wall assembly
The baby unit is wall mountable. The appropriate screw is not supplied. Turn a 3mm screw
into the wall. The screw head must be approx. 3 mm out of the wall so that the screw can be
fixed correctly into the hang hole at the back of the baby unit. Hang the baby unit with its
10
hang hole
carefully to this screw.

11 Battery Charge Level

The BATTERY CHARGE LEVEL in the Parent Unit, as well as in the Baby Unit is indicated
by the number of squares present inside the BATTERY icon on the LCD Display.
Battery Full
Battery 2/3 charged
Battery 1/3 charged
Battery empty
12 Buttons
12.1 Baby unit
(See picture 1 on the folded cover page)
1
VOX sensitivity control
2
Microphone
3
On/Off switch
4
Menu down button: Select the previous value in the menu.
5
External microphone connector (microphone not included)
6
Menu button: Enter the setting menu
7
Power adapter connector
8
Menu up button - Select the next value in the menu.
9
LCD display
10
Hang hole for wall mounting
11
ON/OFF LED
12.2 Parent unit
(See picture 2 on the folded cover page)
12
Charger connector
13
LCD display
14
Call button
15
Menu button - Enter the setting menu
16
Speaker
17
Microphone
18
Menu down button
– Decrease the speaker volume
– Select the previous value in the menu.
19
Menu up button
– Select the next value in the menu.
– Increase the speaker volume
8
TOPCOM Babytalker 1010

Publicidad

Capítulos

loading