Symbols On The Device; Symbols Original Instructions; Operating Times; Operating Hours - Altrad BF 43-2 Manual De Uso

Symbols on the device

Carefully read the operator
handling the machine. Observe instructions and
safety rules when operating.
Wear hard hat if there is a risk of falling parts.
Wear hard hat, eye and ear protection.
Wear protective gloves.
Wear safety shoes.
Keep children, bystanders and animals at a
distance from your working area. Safety distance
at least 15 m.
Be aware of kickback.
Make sure that the cutting head cannot contact
any foreign objects during starting and operation.
Danger objects may be thrown out at high
–
speed.
Risk of injury at feet by contact with the cutting
tool at a no-covered area.
Petrol and oil are a fire hazard and can explode.
Fire, open light and smoking are prohibited.
max. speed of thread spool
max. speed of cutting blade 7100 rpm
Warning of hot surfaces.
Danger of burning!
Do not touch hot engine parts. Such parts may
remain hot for a short time even after the
machine has been stopped.
Fuel mixture 40:1
Engine switched off: stop

Engine started:
Starting position: Choke position for
Cold
start
Operating position: Choke position for "warm start
and working"
Warm
start
This product complies with European regulations
specifically applicable to it.
s manual before
'
6600 rpm
cold start
" "

Symbols original instructions

Threatened hazard or hazardous situation. Not
observing this instruction can lead to injuries or cause
damage to property.
Important information on proper handling. Not
observing this instruction can lead to faults.
User information. This information helps you to use
all the functions optimally.
Assembly, operation and servicing. Explanation of
what exactly needs to be done.
Important notes for environmentally compatible
conduct. Failure to observe these instructions may
lead to environmental damage.
Please refer to the attached assembly and operating
instruction sheet for references to figure numbers in
the text.

Operating hours

Before initiating the device please observe the provisions
pertaining to corresponding laws (regional provisions) for
the noise control.
Information on how to avoid noise:
Some noise exposure from this machine is unavoidable.
Schedule noisy work to times during which it is allowed. Respect
all rest times and restrict the work duration to the minimum. You
as the operator and bystanders should wear a suited hearing
protection.

Proper use

• This brush cutter may only be used for mowing grass and for
cutting shrubbery and brushwood in private households.
• This grass trimmer is designed for cutting grass and similar soft
vegetation and for trimming lawn edges in private and hobby
garden areas which are not accessible with a lawnmower.
• The device is not allowed to be used in public gardens, parks,
sports centres or at roadsides as well as in agriculture and
forestry.
•
This brush cutter/ grass trimmer is not allowed to be
used for cutting or chopping:
− hedges, shrubs and bushes,
− flowers,
− in terms of composting.
Otherwise, there is a risk of injury.
• The intended usage also includes compliance with the
assembly, operating, servicing and repair conditions
prescribed by the manufacturer and following the safety
instructions included in the instructions.
• Any other use is deemed not to be use as prescribed. The
manufacturer is not liable for any type of damage resulting
from this: the user bears the sole risk.
19