Midland 445 BT Manual Del Usuario página 4

nearby.
You will have about 1 minute time to start the same procedure with Your headset. If both units are pairing, they will exchange
their individual serial numbers and some codes, which later lets them detect each other as paired. In future, both units will detect
each other immediately after switching them on.
•
The LED's will stop flashing after pairing has been completed. Now, the LED will only flash green from time to
time. This shows that both units are paired, but they are in StandBy mode.
Info: Automatic PIN Code transfer
If You should have already paired a BT device with a mobile phone, You will have learned to enter the 4 digit PIN code for the
headset into the mobile phone. Since the 445 BT has no keyboard, the Bluetooth chipset in Your radio will automatically transfer
the PIN code to your
•
0000 (e.g. for our MIDLAND BT Intercom, Albrecht Rider, BMW und Vemar helmets)
•
1234 (e.g. for many other Standard Bluetooth Headsets), or
•
1111 , which is also used often.
Other PIN codes cannot be paired with 445 BT. (We have no information about any suitable headset type, which should use
different PIN codes as the above mentioned 3 codes.
•
To be on the safe side, You should ask Your Headset supplier for the PIN code information before You buy the
Bluetooth Headset or – helmet).
headset, provided that the headset will use one of the usual PIN codes: