3.1. Connection to a live line
•
Connect the test leads to a telephone line which is powered by the CO.
•
Talk and hear with the technician at the other end of the pair under test.
3.2. Connection to a dead line
Make sure that the cable under test is not powered.
•
Connect one of the two test leads to a dead telephone line.
•
Connect the other lead to a power supply box like e.g. AR96, or to a 9
VDC source, as indicated in the following picture.
•
Talk and hear with the technician at the other end of the pair under test
3.3. Connection through IDC contacts at a local exchange (NCP-IDC)
•
Insert the IDC Key into the socket connector
•
Disconnect with the switch the CO side from the end user side
4.
Versions
NCP2
Test headset, shock proof amplifier, cord with Fava
MO86 crocodile clips
NCP2-RJ
As above, "slim" type crocodile clips and RJ11
NCP2-IDC
As above with IDC connector for local exchange
Accessories
Bag in nylon cordura
NCP2-Amp
Amplifier with shock proof circuit (for NCP-RJ)
IDC Key
Red crocodile clip MO86 (2 pieces)
Black crocodile clip MO86 (2 pieces)
Description
Product's code
- 7 -
CNCP00010
CNCP00011
CNCP00012
DCPT00005
BTER00165
APCB00103
CMOO00005
CMOO00004