Formulas To Calculate Thrust Force Or Traction Force; Intended Use; Package; General Recommendations - TOPP C240 Serie Istrucciones Instalación

FORMULAS TO CALCULATE THRUST
3.4
FORCE OR TRACTION FORCE
2
vertical or horizontal skylights (Fig.3):
F = Force necessary for opening or closing
P = Weight of skylight or vertical (only movable part)
F = 0,54 x P
Top-hinged (Fig.4) or bottom-hinged (Fig. 5)
windows:
F = Force necessary for opening or closing
P = Weight of window (only movable part)
C = Opening stroke of the window
H = Height of window (only movable part)
F = (0,54 x P) x (C / H)
3.5

INTENDED USE

The actuator is designed and made exclusively to provide
automatic opening and closing, by means of a control
device, of top-hinged, bottom-hinged, and vertical
mounting windows. Any other use is strictly prohibited in
order to ensure the safety of the installer and user at all
times, and the correct performance of the actuator.
3.6

PACKAGE

Every standard package of the product (cardboard
carton) contains (Fig.7):
-1 Actuator complete with electric power cord (Ref.A);
-2 Clamps for top-hinged or vertical mounting installation
with relative hardware (Ref.B);
IT 4
SAFETY
4.1

GENERAL RECOMMENDATIONS

The operators must be informed about the risks of
accidents, the safety devices for the operators and the
general accident-prevention rules foreseen by the
international directives and laws in force in the country of
use of the actuator. The operators' behavior must always
scrupulously comply with the accident prevention rules in
force in the country in which the actuator is used.
Any unauthorized tampering or replacement of
actuator parts and any use of accessories or consumable
materials different from the originals may cause a risk of
accident and relieves the manufacturer from any civil and
C240
EN INSTALLATION AND USE INSTRUCTIONS
-2 Clamps for bottom-hinged assembly with the relative
hardware (Ref.C);
-2 Brackets for windows with bottom-hinged opening
(Ref.D) with relative shims (Ref.D1) and covering plackets
(Ref.D2);
-2 Brackets for fastening to the window for top hinged
assembly(Ref.E1) with relative covering plackets (Ref.E3);
-2 Brackets for fastening to the window for bottom hinged
assembly (Ref.E2)with relative covering plackets (Ref.E3);
-2 Brackets for fastening to the window for vertical
mounting assembly (Ref.E4);
-1 Package of hardware (Ref.F) consisting of: 4 screws
type AF d4.2 x 19 mm for fastening of the snaps fastener or
6 screws type AF d4.2 x 19 mm for fastening of the bottom-
hinged window bracket and 12 screws type AF TC d4.8x16
for fastening of the brackets to the window);
-2 Snaps fastener (Ref.F1) with relative unfastening tool
(Ref.F2);
-1 Set of instructions for installation and use (Ref.G1) and 1
drilling template (Ref. G2);
-1 Safety plate (Fig.6).
Make sure the parts described above are in the
package and check that the actuator has not
undergone any damage during shipment. If anything
is wrong, do not install the actuator and contact your
retailer or the manufacturer to request technical
service.
The parts included in the package as described above,
especially the brackets and clamps, are related to the
configuration selected in the order.
criminal liability.
If the window is accessible or installed at a height of
less than 2.5m from the ground and if it can be controlled
by untrained users or by remote control, the system must
be equipped with an emergency stop that acts
automatically to prevent the risk of crushing or dragging
any parts of the body placed between the mobile and the
fixed part of the window.
Operations of routine and special maintenance calling
for even partial disassembly of the actuator must be
performed only after interrupting the power supply to the
actuator.
Do not remove or alter the labels applied by the
17