Product Ratings; Operation - Emerson SOLAHD STF Serie Manual De Instalación

EnglishVersion
Notes / Notas / Remarques

Product Ratings

Environment – For use indoors, in an ambient temperature of -40º C to
+45º C, with a relative humidity 0% to 95% (non-condensing).
Maximum Current Capability – The total current draw for all loads that a
model may continuously handle is given in the Voltage, Current and Power
Configurations table. Overloading the unit can permanently damage
the device.
Nominal Voltage – The nominal operating voltage for each model is given
in the Voltage, Current and Power Configurations table. Failure to use
the unit at its rated voltage can permanently damage the unit or provide
inadequate protection.
Supplemental Enclosures - All units provided with terminal blocks must
be installed inside an enclosure and located so as to prevent accidental
contact with terminals during maintenance or servicing.
Grounding - Input and output ground terminals (if provided) must be
connected for proper operation. This grounding is not only required for
safety, but also for equipment performance.
Incorrect grounding can reduce or impede the operation of the unit.

Operation

These products are designed for years of trouble-free operation and
require little or no operator intervention after installation. Should the unit
not appear to be functioning properly check all connections, and assure
the voltage is correct and that the total current draw on the unit from all
loads does not exceed the rated current. If the unit is still not functioning
properly, call Sola/Hevi-Duty at (800) 377-4384.
- 26 - - 3 -