Vacuuming Dry Materials - RIDGID wd64250 Manual Del Proprietário

Operation (continued)
To reduce the risk of electric shock,
this appliance has a polarized plug
(one blade is wider than the other except
230 volt models). This plug will fit in a
polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified
electrician to install the proper outlet. Do
not change the plug in any way.
After you plug the power cord into the
outlet, turn the unit on by pushing the
ON/OFF switch from position "0" to
= OFF
position "I".
ON/OFF
Switch
Familiarize yourself with the accessories
included with the Vac. Each accessory
may be used in various ways for
vacuuming and blowing debris. Here is
a list of the accessories and their uses.
hose - Provides transfer of vacuum or
blowing capability to work site. Provides
the means of attaching extension wands
Extension Wands - Connect the wands and nozzles.
together to provide additional length.
Utility Nozzle - General purpose nozzle
for most vacuuming applications.
Wet Nozzle - Used for wet pickup on
smooth surfaces to pick up liquid and dry
the surface in one stroke.
= ON
8

vacuuming Dry Materials

1. The filter must always be in correct
position at all times to avoid leaks and
possible damage to Vac.
2. When using your Vac to pick up very
fine dust, it will be necessary for you
to empty the drum and clean the filter
at more frequent intervals to maintain
peak Vac performance.
NOTE: A dry filter is necessary to pick up
dry material. If you use your Vac to pick
up dust when the filter is wet, the filter will
clog quickly and be very difficult to clean.
3. If your filter is wet but you need to use
the Vac to pick up dry material, you
must first allow the filter to dry.
Cartridge
Filter