Vacuum-Coupled Mode - NSK ULTIMATE XL-K Manual De Operaciones

(3) Motor signal check
Press Forward/Reverse Selector Switch, and
9
horizontal lines. Turn the motor slowly by hand, and this display will change to one line, two
lines, one line, two lines, smoothly from the top to bottom or from the bottom to top. If any
one of the three lines does not light, the sensor (Hall IC) in the motor is faulty or the cord is
severed, therefore repair is needed. To cancel this check, press
Switch again.
Eg.
2 3
(4) "Pd": Knee Controller or Foot pedal check
Press 9 Forward/Reverse Selector Switch, and
Indicator changes in hexadecimals ( 0~9, A~F ) according to the amount of depressing
Knee controller or
5
it fully extinguishes the lamp. If
properly, 5 Knee controller or
9
Forward/Reverse Selector Switch again.
(5) "in": Initializing function
Press 9 Forward/Reverse Selector Switch, and beeps will be made and rotation direction,
other settings will return to the factory set condition.

11. Vacuum-coupled Mode

On some dental tables with vacuum dust collector, the motor may be used while being coupled
with a dust collector. When such a dust collector * is used, power consumption of ULTIMATE
XL-K/D can be regulated so that the vacuum-coupled function can work. If you need coupling
with a vacuum dust collector, select the mode as follows:
How to select the mode
While pressing Forward/Reverse Selector Switch, turn on
9
can be selected. A long beep indicates vacuum-coupled mode and 2 short beeps indicate
non-coupled (energy-saving) mode.
* Each time the switch selection is made, the mode changes between vacuum-coupled mode
and non-coupled mode.
* A currently known dust collector is KAVO EWL-560.
(Hall IC check)
4 A b C d
Pedal. Also, depressing the pedal slightly lights LED, and depressing
6
11 Indicator does not change smoothly or LED does not light
Pedal may be faulty. To cancel this check, press
6
Rotation direction: FWD (forward)
Vacuum-coupled mode: OFF
Motor/Turbine: Motor
AUTO Cruse: OFF
Indicator will indicate one or two
11
C b A 4 3 2
11 Indicator will change. During normal time,
Power Switch, and the mode
12
11
Forward/Reverse Selector
9