Introduction; Unpacking And Checking Carton Contents; Carton Contents List; Caster/Caster Foot Assembly - RIDGID WD1250 Manual Del Operador

SP6663-2 12 GALLON.qxd

Introduction

This Wet/Dry Vac is intended for house-
hold use. It may be used for vacuuming
wet or dry media and may be used as a
blower.

Unpacking and Checking Carton Contents

Remove entire contents of carton. Check
each item against the Carton Contents
List. Contact 1-800-4-RIDGID or E-mail
us at info@ridgidvacs.com if any parts
are damaged or missing.

Carton Contents List

Key Description
A Wet/Dry Vac ................................1
B Tug-A-Long Hose.........................1
C Caster ..........................................4
D Caster Foot w/Storage.................4
E Extension Wands .........................2
F Utility Nozzle ................................1
G Wet Nozzle...................................1
H Car Nozzle ...................................1
J Operator's Manual .......................1

Caster/Caster Foot Assembly

1. Turn the dust drum upside down on
the floor.
2. Insert the caster feet into the bottom of
drum, as shown (4 places).
3. Push on the caster foot until the foot is
flush with bottom of the dust drum.
4. Insert the caster stem into the socket
of the caster foot, as shown (4
places).
5. Push on the caster until the ball on the
caster stem is inserted all the way into
the socket. You will hear the ball snap
into the socket and the caster will
swivel easily when positioning is
correct.
6. Turn the drum upright.
4/21/08 10:40 AM
Read this operator's manual to familiarize
yourself with the product features and to
understand the specific usage of your
new Vac.
Qty
4
Page 4
A
J
B
F
Caster
Caster Stem
Caster Ball
Caster
Foot
Hole
Dust
Drum
C
D
E
H
G
Pin