Low Battery Indicator; Basic Operation - Bushnell HYBRID 201951 Manual Del Usuario

on a full charge. However, battery life is diminished due to a variety of factors including temperature and backlight
usage. All rechargeable batteries lose their effective charge length over time.
Low Battery Charge Indicator within the Laser Rangefinder Display: If the symbol " " is seen in the laser rangefinder
display, this means that the battery charge is getting low and the internal battery should be recharged.

low BAttery indicAtor

Mini uSB port

BasiC operation

While looking through the 5x eyepiece, press and release the FIRE button once to activate the in-view Liquid Crystal
Display (LCD). Place the aiming circle (located in the center of the image) on a target at least five yards away. Press the
FIRE button again and hold it down until the range reading is displayed near the bottom of the LCD. Crosshairs surrounding
the aiming circle indicate that the laser is being transmitted. Once a range has been acquired, you can release the FIRE
button. The crosshairs surrounding the aiming circle will disappear once the FIRE button has been released (the laser is
no longer being transmitted), but the LCD will remain active and display the last distance measurement for the next 30
seconds. You can depress the FIRE button again at any time to distance to a new target. The maximum time the laser is
transmitted (fired) is 10 seconds. To re-fire, press the button down again.
7
201951+201951EU Hybrid_5LIM_rev102312_Geodis repack version.indd 7 10/25/12 4:44 PM