Use; Preparation - Atag CM4411 Manual De Instrucciones

USE

Preparation

EN 8
The fi rst time you switch on the appliance and every time that it is
plugged in, the appliance executes a SELF-DIAGNOSIS action. Then
the appliance switches off.
To turn it on, press the on/off button on the control panel.
1. The fi rst time you use the appliance, select the language. Press
the main ON/OFF switch on the right side of the appliance (see "A"
on page 5); the lights on the front side and the display go on. Wait
for the appliance to display PRESS MENU FOR ENGLISH. Press
the menu button for at least 3 seconds until the appliance displays
ENGLISH. The appliance then displays the setting message in
English.
2. After a few seconds, the appliance displays FILL TANK! To fi ll it,
remove the tank (fi g. 1), rinse and fi ll with fresh water. Never exceed
the MAX line. Put the tank back and push it as far as it will go.
1
Only fi ll the water tank with cold water. Never use other liquids
such as mineral water or milk.
To ensure good, aromatic coffee at all times, you should:
• change the water in the water tank every day;
• clean the water tank with normal water for rinsing (not in the
dishwasher) at least once a week. Then rinse off with fresh water.