Atag CM4411 Manual De Instrucciones página 127

USE
CLEAN
21
22
23
Cleaning the nozzles
Clean the nozzles on the milk container every time after heating milk or
making cappuccino. Otherwise, remains of milk may set hard.
1. Place a container under the milk dispenser pipe and press on the
CLEAN button on the milk container for at least 5 seconds
(fi g. 21). The display shows CLEANING!
Warning! Risk of scalding from steam and hot water escaping
from the milk dispenser pipe.
2. Remove the milk container and clean the nozzles on the appliance
with a damp cloth (fi g. 22).
3. Put the hot water nozzle back in (fi g. 23).
After you fi nished cleaning, remove the milk container and place it in
the fridge, as the milk should not stay out of the fridge for longer than
15 minutes. See "Cleaning the nozzles and the milk container" on
page 23 for information on cleaning the milk container.
EN 19