Ferroli CONNECT Manual De Instalacion Y Uso página 54

6) advanced settings (Pl)
» Installer parameters
Enter the code "10" and apply; the following parameters are available:
CalI: for adjusting the room probe temperature.
faCT: set the factory values.
hOn/hOf: room temperature control hysteresis.
BKlT: display lighting duration
hhCh: maximum flow set point
llCh: minimum flow set point
ClI: set climatic curve (see par. 5.8 on page 55)
hhb0: CH set point in boiler
EXIT: exit installer menu
7) Exit
» Press "set"
54
EN
(Attn: Any comfort program is overwritten)
to return to the main menu.
cod. 3541S181 - Rev. 00 - 09/2020