MZ electronic FF-300 Instrucciones De Uso página 29

Pushing the
displays the total and instantaneous consumption:
Fuel Cons.
Tot
Inst
N.B.: In order to measure correctly the fuel consumption you have to be sure
that the working pressure isn't more than the maximum allowed for each
transducer and must be more than 1 bar.
Moreover, the in and the out fluxes must always be within the minimum and the
maximum range which is indicated for each transducer, apart from the fuel
consumption.
At the first start up the instrument will be preset from the factory (see table).
FF-300
(UP) or
36 Lt
116.5 Lth
Parameter
Backlight time
Units of measurement
Consumption
Trip duration
Beep keys
Language
Pulses/Liter
(DOWN) keys again moves to the screen that
Total consumption
Instantaneous consumption
Default value
30 seconds
Litres
0
0
Yes
Italian
100
- 29 -
English
Rev. 05-2011