OPERATION
W A R N I N G
Do not allow familiarity with tools to make you care-less. Remember that a careless fraction of a
W A R N I N G
Always wear safety goggles or safety glasses with side shields when operating tools. Failure to
do so could result in objects being thrown into your eyes, resulting in possible serious injury.
W A R N I N G
Do not use any attachments or accessories not recommended by the manufacturer of this tool.
The use of attachments or accessories not recommended can result in serious personal injury.
W A R N I N G
Do not allow hands, feet, or any other part of the body or clothing near the rotating tines or any
other moving part. The tines begin to rotate forward once the switch trigger is depressed. The
tines continue to rotate until the switch trigger is released. Failure to avoid contact could cause
serious personal injury.
STARTING THE CULTIVATOR (See Figure. 8.)
1. Plug the cultivator into an approved outdoor extension cord.
2. Press the safety lock button and pull the bail switch to the handle to begin the rotation.
Release safety lock button while continuing to hold upward on bail switch to continue use.
STOPPING THE TILLER/CULTIVATOR
Release bail switch to stop the cultivator.
SAFETY LOCK
BUTTON
BAIL SWITCH
17
Fig. 8