Before Use - Torin TQ22001 Manual Del Propietário

2. Close the release valve by turning the handle
knob clockwise until firm resistance is felt.
3. When the saddle reaches Max. Lift Height, then
turn the handle knob counter-clockwise.
4. When the saddle reaches Min. Lift Height, with a
flat blade screwdriver, push the oil fill plug slightly
to the side to purge trapped air from system.
5. Close the release valve by turning the handle
knob clockwise until firm resistance is felt.
6. Jack is now ready for use. Check for proper pump
action.

BEFORE USE

1. Before using this product, read the owner's
manual completely and familiarize yourself
thoroughly with the product and the hazards
associated with its improper use.
2. Perform the air purge procedure. (See previous
instructions for system purge procedure.)
8
Autogoods "130"