Publicidad
STEP 22
With the help of another person, carefully turn your unit over on its front side as shown. Position
the back panel as shown making sure bottom edge is flush with the edge of the bottom and side
edges are aligned squarely with the left and right panels. Nail straight into the back edge of the
left and right panels, top and bottom as shown.
Make sure the notch in the back
panel is positioned here.
Assure that the unit is square.
Distance from corner to corner
must be equal as shown.
ameriwoodhome.com
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
9
(x36)
#A21110
T
Bottom edge of back panel to be
flush with bottom edge of the
bottom (D).
29
9
D
Publicidad
