Maintenance And Storage; Warranty Certificate - Myoleo Oleo-Mac HC 605 E Manual De Instrucciones

GB

8. MAINTENANCE AND STORAGE

• Switch off the hedge trimmer and pull out its
power plug before you put it down and clean it.
• For the best cutting performance at all times,
clean and lubricate the blades ate regular intervals.
Remove deposits with a brush and apply a thin
film of oil (see Fig.9).
Use bio-degradable oils.
• Clean the plastic housing and parts with a mild
household detergent and a damp cloth. Never use
aggressive agents or solvents.
• Be particularly careful not to allow any water to
get inside the machine.
• The supplied storage case can be fastened to the
wall. This is the best place to store your hedge
trimmer.
• If the power cable is defective it must be replaced
immediately. If necessary have the cord replace by
a Servicing Dealer.
9. DISPOSAL (Fig. 2A)
In accordance with Directives 2011/65/CE and
2012/19/CE on the reduction of haz ardous
substances in electrical and electronic equipment
(ROHS) and the disposal of waste from such
equipment (WEEE).
When the symbol depicting a crossed-out refuse bin
appears on equipment, this means that it must be
collected separately from other waste at the end of its
working life.
When the equipment is no longer serviceable,
accordingly, it should be taken by the user to a
special sorted collection centre for electrical and
electronic waste, or if purchasing a new product of
similar type, returned to the dealer on a one-for-
one basis (take back scheme).
Proper sorted collection ensures that the discarded
equipment can be sent subsequently for eco-friendly
recycling, treatment and disposal; this helps to avoid
any possible negative impact on the environment
and on health, besides enabling the reclamation of
materials used in manufacturing the equipment.
Unauthorized dumping of waste is irresponsible, and
punishable under statutory regulations.
MODEL
SERIAL No
BOUGHT BY Mr.
Do not send! Only attach to requests for technical warranties.

10. WARRANTY CERTIFICATE

This machine has been designed and manufactured
using the most modern techniques. The manufacturer
guarantees its products for 24 months from the date of
purchase, for private and hobby use. The warranty is
limited to 12 months in case of professional use.
Limited warranty
1) The warranty period starts on the date of sale.
The manufacturer, acting through the sales and
technical assistance network, shall replace free
of charge any parts proven defective in material,
machining or manufacturing. The warranty does
not affect the purchaser's rights as established
under legislation governing the consequences of
defects in the machine.
2) Technical personnel will undertake the necessary
repairs in the minimum time possible, compatible
with organisational needs.
3) To make any claim under the warranty, this
certificate of warranty, fully compiled, bearing
the dealer's stamp, and accompanied by the
invoice or receipt showing the date of purchase,
must be displayed to the personnel authorised
to approve work.
4) The warranty shall be null and void if:
- the machine has evidently not been serviced
correctly,
- the machine has been used for improper
purposes or has been modified in any way,
- unsuitable lubricants and fuels have been used,
- non-original spare parts and accessories have
been fitted,
- work has been done on the machine by
unauthorised personnel.
5) The warranty does not cover consumables or parts
subject to normal wear.
6) The warranty does not cover work to update or
improve the machine.
7) The warranty does not cover any preparation
or servicing work required during the warranty
period.
8) Damage incurred during transport must be
immediately brought to the attention of the
carrier: failure to do so shall render null and void
the warranty.
9) The warranty does not cover injury or damage
caused directly or indirectly to persons or things
by defects in the machine or by periods of
extended disuse of the machine resulting from the
said defects.
DATE
DEALER
11