Equipment Operation - GNATUS ENDUS DUO Manual Del Propietário

EQUIPMENT OPERATION

Functions and Programming
The equipment has 5 modes and 5 functions options according to the table below.
MODE
Normal
√
M1
M2 -
√
M3
√
M4
-
M5
WHEN IN MODE M1 IT'S NECESSARY THE USE OF THE PEDAL AND THE
CONNECTION OF THEELECTRIC MICROMOTOR.
FUNCTIONS OPTIONS
Automatic 2 Apex
√
-
-
√
√
be activated spinning clockwise.
the micromotor automatically retrogresses.
sound alerting the change in the direction of
the spinning, now counterclockwise. When the
pedal is deactivated the direction of spinning
goes back to the initial clockwise direction
(NORMAL).
on the patient lip and fasten the file to the file
support, reminding that in this mode there's no
use of the pedal or micromotor (APEX).
54
Decelerate
- -
√
-
√
-
√
-
√ √
M1: NORMAL
Micromotor mode.
By pressing the pedal the micromotor will
When the torque reaches a certain value
Activating the REVERSE mode, 2 beeps will
M2: APEX
Apex locator Mode.
To use the apex locator use the labial clip
Start / Stop
-
-
√
√
√