Tabla de contenido
Publicidad
ELECTRICAL
3. Position switch pack to steering column, connect 3
3. Position switch pack to steering column, connect 3
multiplugs and tighten screws.
4. Fit direction indicator cancellation cam to steering
4. Fit direction indicator cancellation cam to steering
column.
5. Fit rotary coupler.
5. Fit rotary coupler.
+
ROTARY COUPLER, page 75-6.
86-26
REPAIRS
SWITCH - EXTERIOR MIRROR
$% 86.65.75
Remove
1. Carefully remove switch from fascia.
1. Carefully remove switch from fascia.
2. Disconnect multiplug from switch.
2. Disconnect multiplug from switch.
3. Remove switch.
3. Remove switch.
Refit
1. Position switch and connect multiplug.
1. Position switch and connect multiplug.
2. Carefully push switch back into position.
2. Carefully push switch back into position.
Publicidad
Tabla de contenido
