Alcove or closet installation
Minimum clearances for closet or alcove installations:
Sides
Closet front
The space between the end of the water valve and the wall:
•
Case 1. If you connect the supply hoses after setting the washer in place: Over 3.9 in (10 cm).
•
Case 2. If you connect the supply hoses before setting the washer in place: Over 2.8 in (7 cm).
If the washer and a dryer are installed together, the closet or alcove front must have at least a 72 in²
(465 cm²) unobstructed air opening. The washer alone does not require a specific air opening.
A
B
Recess
Untitled-2 10
1 in / 25 mm
2 in / 51 mm
C
D
E
A
Side view
(closet or confined area)
English - 10
Rear
6 in / 152 mm
Top
21 in / 533 mm
A
1 in. (25 mm)
B
17.7 in. (450 mm)
C
21 in. (533 mm)
D
2 in. (51 mm)
G
E
20.9 in. (530 mm)
F
6 in. (152 mm)
Case 1: 3.9 in (10 cm).
G
Case 2: 2.8 in (7 cm).
F
2014-05-26
10:51:10