Camera Setup; Title; Input Termination; Alarm Input/Polarity - Dedicated Micros system sprite Guia Del Usuario

Camera Setup

This menu detects if a camera is present, and gives the user the ability
to setup camera related parameters. Press the required camera key to
edit that cameras properties.

Title

Each camera title can be up to 12 characters long and include:
A-Z 0-9 / * ) ( & % # ! , . + and space.

Input termination

If the cameras are to be 'looped through' to other devices, the camera
will need to be unterminated (75Ω termination disabled). The System
Sprite software has the ability to set the termination On or Off. The
default setting is On.

Alarm input/polarity

The Alarm input/polarity option allows alarm inputs to be set as either normally open, normally closed, or off (default). Normally
open alarms are open circuit when no alarm is present and close circuit when an alarm is present. Likewise, Normally closed
alarms are close circuit when no alarm is present and open circuit when an alarm is present.

Alarm connection

If alarms are to be used, each camera needs to be configured with the alarm module and contact number. By default module 1 is
used and the contact number is the same as the camera number, e.g. camera 2 would be:
Module 1 Contact 2.
To Navigate Œ
Use the UP/Down keys to select Option
To Exit
Press the
MODE
Version 1.0
Camera 1 detected
Title
Input termination
Alarm input/polarity
Alarm connection
Telemetry protocol
Camera video input
16:49:52
•
Use the Right key to enter Edit Field
or
key to select next Menu Press and Hold the
Camera Setup
Camera 1
On
Normally open
None
None
Connected
Use camera keys to select the next camera
04/03/1999
Ž
Use the Up/Down keys to edit.
key to leave menus.
MODE
Camera Setup
VEXT
25