Operating In Live And Play Mode - Dedicated Micros system sprite Guia Del Usuario

Operating in Live and Play Mode

Live mode provides access to various multiscreen displays, sequencing, and the Setup Menus. Entering 'Live' or 'Play' mode on
a simplex unit will interupt the full screen recording process. In this case the VCR will record the images displayed on the main
monitor.
When in Live or Play mode you may want to:
•
Change Screen modes.
•
Change the camera positions in PIP, QUAD or multiscreen views.
•
Freeze or hold an image.
•
Electronically zoom into an image.
•
Sequence cameras.
•
Change the cameras in a sequence.
•
Control Telemetry (System controller).
•
Select another unit for control (System controller).
When in Live mode you may want to:
•
Access the Menu system.
•
View the system status.
•
View the Alarm log (System controller).
•
Use the short cut key to select the cameras to record (System controller).
•
Use the short cut key to select the cameras with activity detection (System Controller).
•
Use the Panic alarm (System controller).
•
View the VCR signal (System controller).
Version 1.0 Operating in Live and Play Mode 31