Selecting The Cameras To Record; Selecting The Cameras With Activity Detection; Using The Panic Alarm; Using The Vcr Signal Key - Dedicated Micros system sprite Guia Del Usuario

Select the Cameras to Record
Pressing the "
REC. SELECT
Press and hold the MENU key to exit setup.
Select the Cameras with Activity Detection
Pressing the "
ACT SELECT
Press and hold the MENU key to exit setup.

Using the Panic Alarm

The alarm button toggles the System Sprite into global alarm mode. When the
PANIC
(LED illuminated) the System Sprite completes the actions associated with the Alarm relay (R1), and switches the
VCD to alarm record speed. Refer to page 18 - Alarm Actions. Activation of the "panic Key" is also recorded
within the Alarm log. A second press of the
back to its normal operational status.

Using the VCR signal key

The VCR signal key provides user verification of the images being recorded to tape. Pressing and holding the key
will display a quick succession of images that are being recorded. Releasing the key returns the keyboard back to
normal operation.
36 Operating in Live and Play Mode
" button provides a short cut to the "Camera Recording" set up menu, refer to page 14.
" button provides a short cut to the "Activity System" setup menu, refer to page 27.
key clears the global alarm, extinguishes the LED and returns the multiplexer
PANIC
button is enabled
PANIC
Version 1.0