Rear Bar; Rear Rollers; Stopping The Machine; Parking - breviglieri mekfold 300 Instrucciones De Empleo Y Mantenimiento

4.10 REAR BAR

To level and crumble the soil to a greater degree, the harrow has a levelling bar positioned behind the tines. It can be adjusted in
height by means of crank screws. It is advisable to start work with the bar in the upper position and to then adjust it to the required
setting. Make the adjustments by keeping the bar at the same distance from the soil as far as possible. Avoid using the bar at
depth as it could be damaged. Whenever the position of the rear roller must be changed, adjust again in order to skim over
the ground.

4.11 REAR ROLLERS

The machine can be equipped with various types of roller. The main ones are: Packer roller, Cage roller, Spiked roller.
Packer roller
▪
This is used to crumble the soil worked by the tines to a further degree and to guarantee a compact surface, optimum for
seeding. It has a bearing effect if the seed drill is mounted in a combined configuration. It is excellent for dry and hard soil.
Cage roller
▪
This is used for soil of medium consistency and when the degree of humidity is low. It prepares the soil for seeding but does
not compact the surface.
Spiked roller
▪
This is used for damp, clayey soils and in difficult situations. It does not compact the soil but levels it at the rear of the ma-
chine.

4.12 STOPPING THE MACHINE

At the end of the job, the operator must:
▪
Disengage the tractor PTO
▪
Close the machine behind the tractor
▪
Lower the machine to the ground
▪
Stop the tractor and engage the parking brake
▪
Make sure that all parts of the machine have come to a standstill
Only after the above mentioned operations have been carried out may the operator leave the tractor unattended.

4.12.1 PARKING

To park the machine and unhitch it from the tractor, the operator must:
▪
Make sure that no one is standing or crossing the place where the machine will be parked
▪
Make sure that the place in which the machine is to be parked is suitable, flat and uncluttered
▪
Drive to the area where the machine is to be unhitched
▪
Brake the tractor
▪
Lower the bearing stands
▪
Completely lower the machine to the ground
▪
Stop the tractor and engage the parking brake
▪
With the tractor stopped, its engine off and the components at a complete standstill, operate the levers of the hydraulic
circuit so as to relieve the pressure from inside the pipes. This will allow you to re-connect the quick couplings with greater
ease
▪
Disconnect the quick couplings
▪
Remove the driveline from the tractor's PTO and rest it on its bracket
▪
Disconnect the top link rod
▪
Disconnect the power lift links
▪
Switch on the tractor engine and move away
▪
Dry
▪
Sheltered from adverse weather conditions
▪
Guarded or locked up to prevent the machine from being accessed by animals, children or persons who are not trained
mekfold 300
WARNING
The place in which the machine is parked must be:
- 35 -
macchine agricole