Siemens TK 58 Serie Instrucciones De Uso página 24

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 59
en
de
I
lights up on the display.
● Empty, clean and reinsert the trays 1
and .
The appliance heats up and is ready for use
again when all four buttons
h
light up and remain lit.
Important: If the service programme is
interrupted, e.g. due to a power cut, it is
vital that the appliance be rinsed before it
is used again.
● Press the eco button.
button flash.
† The
S
h
LED and
● Rinse the water tank 13 thoroughly and
fill with fresh water.
● Press the steam button
is rinsed and liquid flows into the tray.
LED flashes.
†The
J
● Place a suitable container (approx.
0.5 litres) under the nozzle 9 and turn
g
h
the dial 8 to
/
. Water runs into the
container.
† The
J
LED lights up.
● Turn the dial 8 to
.
The appliance rinses.
I
lights up on the display.
Empty, clean and reinsert the trays.
The appliance is ready for use again.
0
Anti­freeze
In order to avoid damage through cold
during transportation and storage, the
4
5
,
, eco and
appliance must be emptied completely
first.
The appliance must be ready for use.
● Place a large, narrow container under
● Press
● As soon as
● Remove, empty, and replace water tank.
● When foaming nozzle 9 stops releasing
h
. The appliance
● Turn off the appliance.
Disposal
This appliance is labelled in accordance
with the European Directive 2002/96/EG
relating to waste electrical and electronic
equipment – WEEE. The directive provides
the framework for the EU­wide take­back
and disposal of end­of­life appliances.
Please ask your specialist retailer about
current disposal facilities.
Guarantee
The guarantee conditions for this appliance
are as defined by our representative in the
country in which it is sold. Details regarding
these conditions can be obtained from the
dealer from whom the appliance was pur­
chased. The bill of sale or receipt must be
produced when making any claim under the
terms of this guarantee.
Changes reserved.
foaming nozzle 9.
h
button.
J
lights up on display, turn
g
h
dial 8 to
/
.
The appliance will release steam for a
while.
steam, turn dial back to
A
.

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido