Attaching The Appliance To The Top Of The Cavity; Attaching The Individual Appliance To The Side Of The Cavity - Thermador T18 Serie Instrucciones De Instalación

13.
Attaching the appliance to the top
of the cavity
L I ¸ ....
• Attach the cover strip to the attachment plate (top).
Shorten the fitting strip to the required height!
Screw the attachment plate lugs (top) to the overhead
furniture/fixtures.
Fix the attachment plate side lugs (top) depending on
the installation situation.
If there is no gap or only a slight gap, it is not neces-
sary to fix the side lugs.
If there is a fairly large gap above the appliance,
fit a wooden beam above the appliance, ensuring that
the wooden beam fits the gap exactly.
In the case of a side-by-side installation connect
both cover rails to the bolt included in the installation
accessories for side-by-side installation
14. Attaching the individual appliance
to the side of the cavity
• Screw the attachment plate lugs (side) to the adjacent
furniture/fixtures (individual appliances only).
In the case of a side-by-side installation this installa-
tion step is not possible. These parts have been
removed.
27