Inglesina APTICA Instrucciones De Uso página 31

that hold the lining on the backrest.
Then operate the levers (
housings (L1) on the stroller seat.
HOOD LINING MAINTENANCE
The hood lining can be removed to allow for its correct maintenance.
Release the buttons (
Then detach the thicker front band (
side joints ( ) and completely remove the lining.
in the dedicated guides inside the lining.
Finally, insert the bands (
into their housings, and fasten both the side press studs (
CLOSING THE CHASSIS WITH THE STROLLER SEAT ATTACHED (STROLLER
CONFIGURATION)
The chassis can be closed with the stroller seat attached, both rear facing and forward
facing.
previously (
internally with respect to the chassis handlebar.
STROLLER SEAT LINING MAINTENANCE
It is recommended to remove the lining periodically to provide for its correct maintenance.
Detach the two lower bands (
First detach both the front bands (
the side ones (
Detach the four rear press studs (
Remove the waist strap from the side loops (
tooth of the central buckle pass through the side loop before removing it completely.
Remove both the back straps from the protective shoulder straps (J11).
then remove it from its protective pad (J12), releasing it from the locking band (J13).
Carefully remove the lining from the stroller seat structure and, after passing the
back straps through the slots in the backrest, remove it completely.
STROLLER ACCESSORIES: RAIN COVER (if present)
press studs (N2) on the sides of the stroller seat.
Then hook the bands (N3) around the front tubes, at the wheel assembly.
) and simultaneously pull the hood out from the
) on both the hood joints (
) in the side joints (
before closing the stroller, lift the footrest completely, fold the hood
).
before closing the stroller, fold the hood and bring it completely
) from the footrest.
N), position it on the hood and button both bands (N1) to the
).
) and the thinner rear band (
) and the thinner rear band (
), pushing them correctly
).
) from the sides of the stroller seat and then
) from the backrest structure.
) from the
).
31
)