Carmen NC2110 Manual De Instrucciones página 6

6 • ENGLISH
treatment and higher rotation speed for rough skin
treatment.
• Select attachment rotation direction by touching the button
(5), if the button glows red, the attachment rotates counter
clock- wise and if the button glows green, the attachment
rotates clockwise.
• LED illumination (3) is switched on when the unit is
switched on by the button (7) «0/I». To switch the
illumination off draw your finger from the button (4) «+»
to the button (5) slowly, to switch it on draw your finger
backwards.
• After operation switch the unit off by pressing the button
(7) «0/I» and take the power adapter out of the socket.
> ATTACHMENTS
We suggest some options for usage of the manicure/
pedicure attachments. Attention: Always switch the unit
off and remove the power adapter from the mains before
installing and changing the attachments.
Felt cone (8)
Smoothing and polishing the edge of the nail after filing as
well as for cleaning the nail surface. Always polish in circular
movements and do not allow the felt cone to rest in one
place, otherwise friction could cause heat to develop.
Sapphire cone (9)
This attachment is used for smoothing of the nail surface
and rough skin areas. Gently move the attachment along the
treated nail or skin surface.
Flame milling cutter (10)
For removing ingrowing nails. Carefully guide the flame
cutter up to the part to be treated and remove parts of the
nail as necessary.
Cylindrical milling cutter (11)
Grinding of lignified foot nail surfaces as well as smoothing
of these. For this purpose, apply the milling cutter
horizontally to the nail surface and remove the unwanted
layer of nail using slow circular movements.