14.2 Cleaning
Remove the coffee grounds from the grinding/brewing container.
Clean the filter under running water and dry it after this.
it and the lid under running water, dry both after this. Replace the
filterinsert.
► Do not clean the device when it is hot.
► Never put the device (besides above mentioned parts) into water or under running
water.
► Be sure to unplug the device before cleaning. To protect against electrical shock do not
immerse cord, plug or unit in water or liquid.
14.3 Descaling
The device has to be descaled regularly, otherwise the coffee taste will be affected and the
scale deposits can damage the device.
When the noise during brewing increases, or the brewing time is longer, or the device
switches off before the water tank is empty, then these are indications that descaling is
necessary. The frequency of descaling depends on the water hardness and how often the
device is used.
-
With soft water, descale at least every 3 month
Rinse grinding/brewing container under running water and dry it
after this. Clean the lid of grinding/brewing container in the same
way.
Clean the cooled jug with water and dry
it.
Remove the round filterinsert and clean
Warning
Press the drip stop and clean it with
running water, then dry it.
54